What is the working principle of the drum fertilizer granulator?
The working principle of the series of drum fertilizer granulator is: the belt and the pulley are driven by the main motor, and the drive shaft is driven by the reducer, and the split gear mounted on the drive shaft is coupled with the large gear ring fixed on the body. Teeth, work in opposite directions. The material is added from the feed end through the inside of the cylinder. Through the special structure inside the drum of the drum fertilizer granulator, it is made into granules and finally flows out through the discharge port. Due to the continuous entry of materials and the continuous rotation of the granulator, mass production can be achieved.
What is the installation procedure for the drum fertilizer granulator?
1. The drum fertilizer granulator should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If so, tighten it.
4. According to the power of the drum fertilizer granulator, configure the power cord and control switch.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
How to lubricate the drum fertilizer granulator?
1. Drum the fertilizer granulator to dry the butter before starting the gear;
2, wipe the surface of the belt for 7 days to dry the butter;
3. The bearing housing is fired every three months or replaced with new dry butter;
4. The gear reducer of the drum fertilizer granulator must be added once before use, and then replaced every four months.