Organic fertilizer disk granulator in operation, will inevitably be worn.In the disk granulator normal life of these controllable damage, wear and tear on the equipment is not very big, so do not worry too much.But serious wear is different, will cause the use of disk granulator hazards.Therefore, the organic fertilizer disk granulator wear to do a good job inspection management.
What are the wear factors of disk granulator?
1, run-in wear: this is the disk granulator is relatively common normal wear.
2. Grinding wear: the wear on the worn surface of the disk granulator caused by hard grain cutting.
3, corrosion wear: the friction surface of the disk granulator due to continuous penetration of water vapor, chemical gases or oxides and other media, so that the friction surface oxidation deterioration.Generally for oxidation wear and chemical corrosion wear.
4, dirt and wear: granulating disc in operation and after the discharge are will produce a certain amount of dust, if not in time for cleaning maintenance, dust will enter into the granulating disc days tired month product,granulating disc joint friction is, the greater the corrosion to the granulating disc, impact on the performance of the equipment.
5, in the operation of the organic fertilizer disk granulator process, our staff also need to pay attention to the lubrication of the equipment connection, disk granulator long-term use, for equipment lubrication is a severe test.Once there is a jam, disc granulator friction will increase, only a high degree of lubrication will provide good power support for the operation of the organic fertilizer disc granulator, and the staff should develop a good habit of cleaning and maintaining the equipment regularly.