E-mail:david@gateind.com

Maintenance method of Flat Die Granulator

平模造粒机2

Flat die granulator equipment is flexible in installation, simple in operation, low in energy consumption, high in power efficiency and output. The granulation rate of one-time extrusion is more than 90%. It is suitable for organic fertilizer production and animal feed production. Moreover, the equipment has a compact structure and stable quality, which is suitable for 24 hours of continuous work.

Flat die granulator equipment is flexible in installation, simple in operation, low in energy consumption, high in power efficiency and output. The granulation rate of one-time extrusion is more than 90%. It is suitable for organic fertilizer production and animal feed production. Moreover, the equipment has a compact structure and stable quality, which is suitable for 24 hours of continuous work. Do you know how to maintain the flat die granulator equipment to further extend its service life?

平模造粒机

Daily maintenance of flat die granulator

  1. The machine should be started under no load, and it is strictly forbidden to start it with materials.
  2. It is strictly forbidden to enter the material with iron to avoid breaking the roller.
  3. Yellow dry oil should be applied to the gears before starting the machine.
  4. Apply yellow dry oil to the chain and sprocket every 7 days.
  5. The bearing seat should be refilled or replaced with new yellow dry oil every three months.
  6. The gear oil must be added once before the reducer is used before it can be used in production. Change the gear oil every four months.
  7. The wearing parts of the flat die granulator: rolling bearing, template, roller, scraper.

平模造粒机2

Precautions for the use of flat die granulator

  1. When using, pay attention to the fact that there are no hard objects such as stones and iron blocks in the raw materials, which may damage the roller and the template. The roller needs to be disassembled after more than ten shifts (8-hour shift), and high temperature grease is added to the bearing to extend the service life of the bearing.
  2. During granulation, it is strictly forbidden to contact the roller and the template idling.
  3. When there is no granulation and no discharge during granulation, the template should be disassembled to clean the tunnel.
  4. Check the gearbox oil quantity and whether there is oil leakage frequently. Change the gear oil every 720 hours of work.
Last Article:

Organic Fertilizer Plant Line Delivery to Canada


Next Article:

How Does a Vertical Organic Fertilizer Ferment Tank Work?