What is the drum granulation fertilizer machine purchased by Canadian customers?
The drum granulator is a molding machine that can manufacture materials into specific shapes. Drum granulator is one of the key equipments in the compound fertilizer industry. It is suitable for large-scale production of cold and hot granulation and high, medium and low concentration compound fertilizer. The main working mode of the organic fertilizer drum granulator is wet granulation of the pellets. After a certain amount of water or steam, the basic fertilizer is fully chemically reacted in the cylinder, and under certain liquid conditions, the drum is made. The rotating motion of the barrel of the granule causes a squeezing force between the material particles to agglomerate into a ball.
Canadian customers have a look at the advantages of the drum granulator?
1. The ball granulator has a ball-forming rate of 70%, a small amount of material is returned, and the particle size is small, which can be re-granulated;
2, through the steam heating, increase the temperature of the material, so that the material is low after the ball into the ball, improve drying efficiency;
3, with rubber engineering plastics as the inner lining, the raw materials are not easy to stick to the cylinder, and play a role in anti-corrosion and heat preservation;
4. The drum granulator has large output, low power consumption and low maintenance cost.
How to install the drum granulator?
After the drum granulator arrives at the factory, it is installed with the process flow, indicating the elevation and horizontal position, and the installation is inclined. The general inclination is 2-5 degrees (the user needs to adjust). The bracket and the transmission frame have the ground. Holes can be mounted on concrete. The total thickness of the mats between the bases and the foundations of the machine shall be no more than 30-35mm; the height of each base shall be adjusted by the dome-shaped pad to make the bottoms inclined by 5 degrees; the bases of the drum granulator are adjusted to fit Place the cylinder on the bracket and finally adjust the roller